Single components & spare parts
The wireless data transimmsion unit CHRONOS developed by Lympik transmits all information form the vatious sensors and triggers via the cellular network. Photocells, manual triggers, starting gates, step mats, drive-over sensors and light grids are available to meet the needs of different sports and areas of application.
The AION RFID-system enables measurements via transponder which can be used for timekeeping and route control at sporting events.
The stationary wireless data transmission unit ZELOS developed by Lympik transmits all information from the various sensors and triggers via the cellular network. This system was developed for the digitalization of sports venues. A large number of industrial sensors as well as various expansion modules for different areas of application are available.
The external NFC reader was developed by Lympik as an extension module for CHRONOS and ZELOS. This device enables easy identification in applications such as Equipment testing where identification at the start is cumbersome.
Photocell with a range of 22m. The industrial photocell from ifm is characterized by extremely high reliability, even with highly reflective clothing and bad weather conditions. The mounting is carried out by a thread on the snow pole or a tripod, the power supply is provided by the CHRONOS.
Photocell with a minimum range of 12m. The mounting is carried out by a thread on the snow pole or a tripod, the power supply is provided by the CHRONOS.
Industrial pressure sensitive safety mat with high reliability. The safety mat is welded all around and thus protected against the ingress of liquids. It can be used as a switch at the start and finish.
Reflection light grid
Industrial reflective light grid which is available in heights of 70 cm to 180 cm and a width of up to 700 cm. The scope of delivery includes a tripod, the battery and a charger. IP65 and IP67 available
Industrial drive-over sensor with high reliability. The trigger is welded all around and thus protected against the ingress of liquids. It can be used as a switch at the start and finish. The maximum switching length is 50m.
NFC armband for the identification of the athlete on the CHRONOS, ZELOS or the external NFC reader.
NFC sticker for the identification of the athlete / equipment-part on the CHRONOS, ZELOS or the external NFC reader. Suitable for sticking on a helmet, bike, or other equipment.
Reflector for the 22m and 12m photocell. The mounting takes place through a thread on the snow pole or a tripod.
Starter bar made of fiberglass with thread for easy assembly / disassembly on the starting gate. Length = 40cm.
Snow pole with ball head for easy adjustment of the light barrier. The snow pole has a length of 60cm including the brush.
Charging cable with 2 connections for the simultaneous charging of 2 CHRONOS. Optionally also available with single connection.
Sensor cable for the photocell available in lengths of 0.5m, 5m and 10m.
Adapter cable 7-pin CHRONOS plug to 4mm banana plug. This adapter enables the connection of external photocells / start geates to the CHRONOS.
Lympik backpack for the safe transport of the timing-system.
Adapter for Alge D-Line display. Connect your existing Alge display with the Lympik WebApp.